The GOODTEK MACHINERY Co Ltd

Join the world with professionalism.Seek professionalism from the world.

Wed, 24 Jun 2015 02:31:56 +0000

Join the world with professionalism.

Seek professionalism from the world.

Our excellent quality machines we will satisfy all your needs.
Trust our professionalism. Trust GOODTEK.

GTM-1020W double surface planer (GTM-1020W)

Tue, 23 Jun 2015 04:42:09 +0000

• Maximum cut width up to 1,020mm

• 40(50)HP top cutterhead drive

• 30(40)HP bottom cutterhead drive

• Table surface is hard chrome plated and precision ground thereby assuring smooth feeding motion and maximum wear resistance

• Sectional infeed roller

• Equipped with mechanical overload warning lamp

• The table is equipped with four powered roller

• Powered elevation of upper mechanism

• Heavy duty machining

• Ruggedly constructed throughout

STANDARD ACCESSORIES

• Rear cutting mechanism

• Helical cutterhead rest

• Pneumatically operated disk brake

• Convenient and accurate front table adjustment

• Swiveling control panel

• Infeed and outfeed extension roller

• Slidway stabilizing cylinders

• Powerful transmission system

• High quality electronic components

HS-635ARD High speed double side planer (HS-635ARD)

Tue, 23 Jun 2015 04:36:41 +0000

• Working width 635mm(25")

• Y-delta starting on motor

• Automatic lubrication on feed chain

• Table surface is hard chrome plated and precision ground thereby assuring smooth feeding motion and maximum wear resistance

• Sectional infeed roller

• Equipped with overload warning lamp

• The table is equipped with three powered roller

• Powered elevation of upper mechanism

• High speed feed up to 40 m/min

STANDARD ACCESSORIES

• Rear cutting mechanism

• Mild pressure spikes

• Table rollers

• Powerful feed drive

• Swiveling control panel

• Outfeed extension roller table

GT-610A double surface planer (GT-610A)

Tue, 23 Jun 2015 04:31:36 +0000

• Working width 610mm(24")

• Quick thickness setting device

• Equipped with a plain cutterhead

• Slideways are lubricated by centralized hand lubricator

• Feeding inverter with an additional gear reducer

STANDARD ACCESSORIES

• Well laid-out pressure spikes

• Fast knife replacement

• Fast and convenient belt tension adjustment.

• Automatic lubricator

• Feeding inverter

• Gear reducer

• Quick thickness setting(standard equipment on models GT-610A and GT-635ARD only. Optional for other models)

• Rear control device

• Centralized hand lubricator(standard equipment on models GT-610A and GT-635ARD only.

• Optional for other models)

GT-400B double sided planer (GT-400B)

Tue, 23 Jun 2015 04:25:38 +0000

• Working width 405mm(16")

• Suitable for planning short workpieces

• Equipped with a plain cutterhead

• Feeding inverter with an additional gear reducer

STANDARD ACCESSORIES

• Well laid-out pressure spikes

• Fast knife replacement

• Fast and convenient belt tension adjustment.

• Automatic lubricator

• Feeding inverter

• Gear reducer

• Quick thickness setting(standard equipment on models GT-610A and GT-635ARD only Optional for other models)

• Rear control device

• Centralized hand lubricator(standard equipment on models GT-610A and GT-635ARD only Optional for other models)

GT-635ARD double surface (GT-635ARD)

Tue, 23 Jun 2015 04:18:45 +0000

• Working width 635mm(25")

• Equipped with digital positioning control

• Equipped with NO. 1 helical cuttehead.

• Quick thickness setting device.

• Slideways are lubricated by central hand lubricator.

• Feeding inverter with an additional gear reducer.

STANDARD ACCESSORIES

• Well laid-out pressure spikes

• Fast knife replacement

• Fast and convenient belt tension adjustment.

• Automatic lubricator

• Feeding inverter

• Gear reducer

• Quick thickness setting(standard equipment on models GT-610A and GT-635ARD only. Optional for other models)

• Rear control device

• Centralized hand lubricator(standard equipment on models GT-610A and GT-635ARD only. Optional for other models)

Good Tek Machinery will display their HS-635ARD High speed double surface planer and GT-400J High speed bevel spindle automatci jointer at Taiwan Int'l Woodworking Machinery Show on July 2 - 5, 2015.

Mon, 22 Jun 2015 01:53:58 +0000

Good Tek Machinery will display their HS-635ARD High speed double surface planer and GT-400J High speed bevel spindle automatci jointer at Taiwan Int'l Woodworking Machinery Show on July 2 - 5, 2015. We sincerely welcome your visiting!

Taipei Nangang Exhibition Booth NO: N0806

GT-400J High speed bevel spindle auto jointer (GT-400J)

Wed, 17 Jun 2015 08:45:50 +0000

• Working width 405mm(16").

• Suitable for planning very short workpieces

• Equipped with a spiral cutterhead

• Feeding inverter with an additional gear reducer

• Meet the challenge of 100mm extra short single surface planing

STANDARD ACCESSORIES

• Angular planing device

• Extened table

• Special-designed control panel

• Special-designed thickness setting of workpiece

GT-400S short-wood double sided planer (GT-400S)

Wed, 17 Jun 2015 08:26:27 +0000

• Working width 405mm(16")

• Suitable for planning very short workpieces

• Equipped with spiral cutterheads

• Feeding inverter with an additional gear reducer

• Meeting the challenge of 100mm extra short double surface planing

STANDARD ACCESSORIES

• Air loaded feed roller

• Synchronized conveyor table(optional)

• Specially designed feeding spikes

• Angular planing device

• Short / long wood change mode

Good Tek Machinery will participate in the Furniture Manufacturing & Supply China 2015 in September 2015 9-12

Wed, 17 Jun 2015 03:29:35 +0000

Good Tek Machinery will participate in the Furniture Manufacturing & Supply China 2015 in September 2015 9-12.We sincerely welcome your visiting!

SWEECC | SNIEC, Pudong, Shanghai Booth NO: E6C92

Good Tek Machinery will participate in the Saigon Exhibition & Convention Center (SECC) in October 14-17,2015

Tue, 16 Jun 2015 13:01:10 +0000

Good Tek Machinery will participate in the Saigon Exhibition & Convention Center (SECC) in October 14-17,2015.We sincerely welcome your visiting!

Saigon Exhibition & Convention Center (SECC) Booth NO: 128

GT-610B 2 sided planer (GT-610B)

Sat, 13 Jun 2015 16:10:17 +0000

• Working width 610mm(24").

• Suitable for planning short workpieces.

• Equipped with a plain cutterhead.

• Feeding inverter with an additional reducer

STANDARD ACCESSORIES

• Well laid-out pressure spikes

• Fast knife replacement

• Fast and convenient belt tension adjustment.

• Automatic lubricator

• Feeding inverter

• Gear reducer

• Quick thickness setting(standard equipment on models GT-610A and GT-635ARD only Optional for other models)

• Rear control device

• Centralized hand lubricator(standard equipment on models GT-610A and GT-635ARD only Optional for other models)

GT-400R Double surface (GT-400R)

Sat, 13 Jun 2015 14:29:20 +0000

• Working width 405mm(16")

• Working Hight 300mm(12")

• Suitable for planning big workpieces

• Equipped with spiral cutterheads

• CE certificate

STANDARD ACCESSORIES

• Well laid-out pressure spikes

• Fast knife replacement

• Fast and convenient belt tension adjustment

• Swiveling control panel

• Automatic lubricator

• Feeding inverter

• Gear reducer

• Equipped with NO. 1 helical cutterhead

• CE certificate

4

Fri, 12 Jun 2015 10:32:53 +0000

3

Fri, 12 Jun 2015 10:32:40 +0000

2

Fri, 12 Jun 2015 10:32:25 +0000